Diagnosis:There are incorrect file permissions under Snow Leopard for the Kyocera printer driver … and this causes some trouble.
Solution:You can easily fix the problem by one command in the Terminal:
1. Log into your Mac as an administrator.
2. Open the program “Terminal” – you’ll find it under “Programs/Utilities”.
3. Input the following command into the appearing command-line window and finish it with pressing the return-key:
sudo chown root:wheel /usr/libexec/cups/filter/kyofilter
4. Now, you’ll be prompted for your password … so put in your password of the admin account and finish the input by pressing the return key again
5. That’s it. Just Close the Terminal program. Now printing on the Kyocera printer should be work like a charm.
[ add comment ] | permalink |
( 2.9 / 81 )| Many places such as libraries and convenience stores
have copiers. You usually find some form of cash collection
on them. This is called a Coin Op system. Here are
a couple of links to companies that provide this copier attachment ACDI Advanced Technologies Coin Copiers.com CPI system.com ITC systems.com Jamex vending.com Vendapin.com |
[ add comment ] ( 1 view ) | permalink |
( 3 / 132 )Lets say you are in an office and their is one continuous set of wiring... but two distinct divisions... These people are anal and want to have their own internet access... their own routers... all on one network... they are using a basic ip network setup but two seperate routers...
(first turn off dhcp on both routers and keep subnet the same)
then
Router 1:
IP: 192.168.1.1
Using ISP #1
Router 2:
IP: 192.168.1.2
Using ISP #2
Division #1 wants to use ISP#1
IP: 192.168.1.100
Gateway: 192.168.1.1
Division #2 wants to use ISP#2
IP: 192.168.1.101
Gateway: 192.168.1.2
You can create your own IP scheme: 192.168.1.1-9 is for ISP #1, 192.168.1.20-29 for ISP#2, etc.
[ add comment ] ( 1 view ) | permalink |
( 2.7 / 118 )| Name | IP Address | Location | Status |
| nist1.uccaribe.edu | 200.50.25.62 | Bayamon, Puerto Rico | Ok |
| nist1-ny.ustiming.org | 64.90.182.55 | New York City, NY | Recommended for new users |
| time-a.nist.gov | 129.6.15.28 | NIST, Gaithersburg, Maryland | Ok |
| time-b.nist.gov | 129.6.15.29 | NIST, Gaithersburg, Maryland | Ok |
| nist1-dc.ustiming.org | 206.246.118.250 | Alexandria, Virginia | Recommended for new users |
| nist1.aol-va.symmetricom.com | 64.236.96.53 | Reston, Virginia | Recommended for new users |
| nist1.columbiacountyga.gov | 68.216.79.113 | Columbia County, Georgia | Recommended for new users |
| nist1-chi.ustiming.org | 208.66.175.36 | Chicago, Illinois | Recommended for new users |
| nist.expertsmi.com | 173.14.47.149 | Monroe, Michigan | Recommended for new users |
| nist.netservicesgroup.com | 64.113.32.5 | Southfield, Michigan | Recommended for new users |
| time-a.timefreq.bldrdoc.gov | 132.163.4.101 | NIST, Boulder, Colorado | Ok |
| time-b.timefreq.bldrdoc.gov | 132.163.4.102 | NIST, Boulder, Colorado | Very busy |
| time-c.timefreq.bldrdoc.gov | 132.163.4.103 | NIST, Boulder, Colorado | ok |
| time.nist.gov | 192.43.244.18 | NCAR, Boulder, Colorado | Ok |
| utcnist.colorado.edu | 128.138.140.44 | University of Colorado, Boulder | ok |
| utcnist2.colorado.edu | 128.138.188.172 | University of Colorado, Boulder | Recommended for new users |
| ntp-nist.ldsbc.edu | 198.60.73.8 | LDSBC, Salt Lake City, Utah | Recommended for new users |
| time-nw.nist.gov | 131.107.13.100 | Microsoft, Redmond, Washington | ok |
| nist1.aol-ca.symmetricom.com | 207.200.81.113 | Mountain View, California | Recommended for new users |
| nist1.symmetricom.com | 69.25.96.13 | San Jose, California | Recommended for new users |
| nist1-sj.ustiming.org | 64.125.78.85 | San Jose, California | Recommended for new users |
| nist1-la.ustiming.org | 64.147.116.229 | Los Angeles, California | Recommended for new users |
[ add comment ] ( 1 view ) | permalink |
( 2.8 / 117 )A word about software tools supplied by the manufacturer that copier technicians are given. In many cases, these things are utter drivel but every once in a while they come in handy.
The best way to use these tools is to first try every thing that you can on the copier. Using all your testing skills and such and then after that pull out the tool.
Why to use these tools?
In some cases, these tools communicate better with the copier than keyboard entries... they may have quirks but they can give you an insight into the copier that you may not be able to get otherwise...
Always trust your tools... but use them sparingly... most copy problems are simple.... but with inexperience the problem becomes difficult to solve...
[ add comment ] ( 2 views ) | permalink |
( 2.8 / 98 )
Calendar
