The sim code for the MC adjustment is 100 and you would decrease the number.
Try sim code 130 to churn up the developer
you could also empty or change the developer unit and load new one then run sim code 130 again.
set text and photo mode to text
clean laser unit
clean the transfer roller or just change it...
[ add comment ] | permalink |
( 2.8 / 79 )Here is how to setup windows server 2003 enough so that we can run a domain, add exchange, add print server and do backups...
[ add comment ] | permalink | related link |
( 2.9 / 45 )| If you are a tech and working for a very small copier company, it is very likely you will be called upon to setup small networks for clients. This should give you enough information to setup a basic enough network to get your clients off the ground. |
| Basic
Home Network Tutorial Basic Home Network with WorkGroup Tutorial How To Remotely Access Your PC Multiple Simultaneous Network Connections In Windows Multiple Internet Connections On A network How to setup VPN Basic VPN Troubleshooting |
[ add comment ] | permalink |
( 2.5 / 35 )I got a call today... customer says, " my copier keeps giving me these weird errors when I print. I make the assumption copier is having a meltdown... I tell the customer to do a simcode 906... issue appears resolved... on a routine visit, the issue reoccurs. I check the copier... its fine... I try to print... it errors out... I take a close look at the application which in this case is adobe reader. The document is 11 by 17 and the application is set to print it at the document size which is 11 by 17. The customer only has letter or legal size paper in the copier. To fix the issue I set the app to shrink to fit and unchecked all the other bells and whistles... The app prints like a dream... the customer had left but his secretary was there. I explained to her but she had hers set that way... from the get go... the moral of the story is to know thy applications... if I wasn't familiar with adobe reader I would not have been able to figure it out... in other words... you need to have a bigger library than just drivers.... and manuals... you need to be familiar with basic software apps as well... and no I am not going to blame the customer...
[ add comment ] | permalink |
( 2.8 / 36 )C:\>ping 192.168.1.25
Pinging 192.168.1.25 with 32 bytes of data:
PING: transmit failed, error code 5.
PING: transmit failed, error code 5.
PING: transmit failed, error code 5.
PING: transmit failed, error code 5.
Ping statistics for 10.22.22.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
If you ever go to a customers site and you see something like this then more than likely someone tried to do 1 of 3 things...
1)they installed vnc and the pc went into shock
2)they tried to setup a vpn and the system went into shock
3)or the system went into shock on its own because it became allergic to antivirus or firmware or registry issues on the pc...
As a tech here is your only recourse...
Tell the customer its not your job to repair their system...
then if they twist your hand...
uninstall the antivirus and the firewall...
9 times out of ten that will fix it...
and allow for scanning to work again...
from that point on... its time for a network technician to step in...
you are in beyond your depth... and its ok to run away...
it might be your job that you are saving...
[ add comment ] | permalink |
( 2.8 / 57 )
Calendar
