If you do not follow these instructions a copier may suffer serious harm....
How to install a usb scanner for km 1820 or any other scanner product.
Don't plug in the usb cable... and I repeat do not plug in the usb cable. This is me with my boot in your face do not plug in the usb cable. Next unplug any other usb or other silly peripherals except for the mouse and keyboard and monitor. Next delete every virtual usb port from the system that they you are allowed to. Next with your pc now isolated from the network and no usb cable connected install the usb scanner. Install your scanner software. Open up your twain driver and name it. Start your scanner software and you should see your twain driver in the scanner drop down list. (paperport) Go scan something... It should work... if it doesn't restart your pc. if it still doesn't work... delete all printer drivers and virtual usb ports and the twain driver and restart then do a fresh install... it should work then...
then breath a collective sigh with me.... DDDAAAANNNGGGGGGGG!!!!!!
[ add comment ] | permalink |
( 3 / 85 )Many times when you are setting up scanning in vista your programs will get blocked. Sometimes you will be able to work around it but there are times when your setup will have to last just as it is. Now, here is the deal. As you know vista blocks a program and you have to enable it every time from the tray. This kind of defeats the purpose of upgrading to a copier. Automation is the key and this atribute makes your copier look like garbage.
I searched and searched and here is the fix...
Start----Run----and type in msconfig.exe
Go to STARTUP Tab and remove the app that is blocked by Vista noting on a sheet of paper where the program is run from. If the program app is run from the startup menu, then just go to Start---All Program Files---Startup Folder and remove the app there.
After removing the app, create an app Task using the Task Schedule with full VISTA blessed permission by following the instructions below:
1. Launch the Task Scheduler
Example: Start Menu → All Programs → Accessories → System Tools
2. From the Actions panel on the right, select Create Task...
a. Give the app a name of your choice in the "Name Section"
3. Go to the Security Options on the General tab
a. Select an user account with administrative privileges
b. Select the radio button Run only when user is logged on
c. Check the box Run with highest privileges
4.Go to the Triggers tab and click New...
a. In Begin the task, select At log on
b. In the Settings options, select All users
c. In the Advanced Settings options, check the box Enabled
d. Click OK to close the dialog
5. Go to the Actions tab and click New...
a. For Action, select Start a program
b. In the Settings options, browse for the Program/Script you want to execute on
startup
c. Click OK to close the dialog
6. Go to the Settings tab
a. Check the box Run task as soon as possible after a scheduled start is missed
b. Uncheck the box Stop the task if it runs longer than
7. Make any other desired settings
8. Click OK to save and close the task properties
[ add comment ] | permalink | related link |
( 2.5 / 26 )Taskalfa Booklet Process
1. Pres copy
2. Press layout/edit
3. Press booklet
4. Press 2-sided >> booklet
There are options in this step for adding a cover to the booklet
5. press saddle stitch
6. press bind and fold
7. press ok
8. press ok
9. press quick setup
10. press paper selection to switch trays
use step 10 to switch paper you are outputting printout on.
Once you have setup the booklet finisher, you may not wish to go through the process every time. Your best bet is to set it up and then create a shortcut.
Create Shortcut
1. press layout/edit
2. press booklet
3. press add shortcut
4. press a box with "none" as its name
5. name it
6. register it
and then you are done...
[ add comment ] | permalink |
( 3 / 55 )[ add comment ] | permalink |
( 2.7 / 54 )change the IP address from your PC to a fixed one (never DHCP on the computer for scanning from a copier !!!) (e.g. 192.168.1.100)
Create a user SMB with pass SMB (easy to remember - an IT engineer can change it, and then will have to read and follow these following steps to adapt it to the new user)
2. create a folder named SCAN
3. share the folder SCAN, and verify that all users have totalcontrol on the folder scan (right click on SCAN, Tab share/security, TOTAL CONTROL must be check for SMB user ...)
4. from another computer (if you have one), try to go on your IP with the folder, by connecting on this address with SMB suer, and SMB pass (=SMB !!) (e.g. //192.168.1.100/SCAN in the explorer of windows, and whe Windows asking you a user, type SMB, and pass SMB - if it is correct, normally, you'll done !
on the copier in the appropriate section enter
USER : SMB
PASS : SMB
PATH : SCAN
ADRESS of the server : 192.168.1.100
[ add comment ] | permalink | related link |
( 2.9 / 35 )
Calendar
