| Why
do you need a decent printer? You need a decent printer when you are doing beyond 1000 prints a month. At this point your typical $100 printer will basically go to pieces. To repair one of those will typically cost you over $100. This is if they still make the parts. Why do you need a copier? You need a copier if you are making 3000 prints a month. At this point, it really is more economical to go with a copier. It is easier just to do everything in house. This way you can focus on running your business and not going to the store and making copies or replacing your printer every 6 months or calling the printer repair man. Difference between owning a copier and a printer? If you own a copier it makes sense to get a service contract. Copiers, like all equipment, have parts that will wear down and need replacing. The cost of replacing these parts can often be more than your service contract. You also have the added bonus of having a proffessional working on your copier and in your corner. Why should you own a black and white and not a color copier? To put it simply, a color copier has 4 toners, 4 drums and 4 developers. This means there are 4 times as many things that can go wrong. Compare this to a black and white or monochrome copier and you have only 1 toner, 1 developer, and 1 drum. I can tell you from a tech point of view that means that the mono or black and white copier is going to have much less downtime. Also keep in mind, color copiers run calibration routines to keep colors aligned and looking their best. This uses toner. So its possible to never use your color copier and run completely out of toner. This is something you never have to worry about with monochrome or black and white copiers. This also applies to printers... |
|
[ add comment ] ( 1 view ) | permalink | related link |
( 2.8 / 17 )THIS MIGHT WORK FOR YOU... IF YOU NEED TO RESET A KM 4035 KYOCERA PRINT CARD OR ANY OTHER KYOCERA... YOU HAVE TO ENTER IT FROM THE COMMAND CENTER INTERFACE.... THE PART THAT LETS YOU INPUT TEXT...
(go to 'printable data' somewhere in the menues, choose text and then type in the command.)
!R! ACNT "REST";EXIT;
OR TRY THIS ONE
!R! SIOP0,"RESET:0"; EXIT;
IF NOT THEN YOU HAVE TO DO AN ADMINISTRATIVE RESET... A U020 OR 21 ON THE MACHINE... THOSE CLEAR THE FUNCTION AND ALL DATA ON THE MACHINE...
OR FOR THE NEWER MODELS
You can always backup data with U917 and run U024 and U021 to restore to factory default.
[ add comment ] | permalink |
( 2.9 / 31 )THIS MIGHT ALSO WORK FOR OTHER KYOCERA COPIERS... YOUR MILEAGE WILL VARY...
How To Reset KM 4035 Scan Card which have been administratively locked.
The scan card comes with four pins
**
**
Normal position for the jumper across the pins is
__
**
**
meaning jumper is across the top pins. To verify the sticker on the card saying ns30 should read from left to right...
To reset the jumper make sure to turn off the copier and unplug it... then remove the card...
the jumper should be placed in the following position
|**
|**
Place the card back in the copier... plug in the copier and turn on the copier... if its working you should see a red light on the card...
Leave it in for 10 seconds...
Ok... Now turn off the copier... and unplug it... take out the scan card... return it to default position
__
**
**
Then place card back in the copier... plug in copier and turn on the copier...
[ add comment ] | permalink |
( 2.5 / 13 )Helpful guide on how to fix your copier and reduce your downtime.. Color Copier Repair
[ add comment ] | permalink |
( 1 / 1 )[ add comment ] | permalink |
( 2.9 / 92 )
Calendar
